Parts for guide positioning
Guide pins
Guide pins
| Product name | M-GPA |
| Type | Head type (With oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 60～64HRC (Induction hardening) |
Guide pins
| Product name | M-GPH |
| Type | Head type No oil groove |
| Mterial | SUJ2 |
| Heat treatment hardness | 60～64HRC （Induction hardening） |
Precision Guide pins
| Product name | M-GPHF |
| Type |
Head, Press-fit length designation type |
| Material | SUJ2 |
| Heat treatment hardness | 60～64HRC （Induction hardening） |
Precision Guide pins
| Product name | M-GPHFS |
| Type | Head, Press-fit length designation type (With spiral oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 60～64HRC （Induction hardening） |
Precision Guide pins
| Product name | M-GPSF |
| Type | Straight, Press-fit length designation type (No oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 60～64HRC （Induction hardening) |
Precision Guide pins
| Product name | M-GPSFR |
| Type | Straight, Press-fit length designation type (With oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 60～64HRC （Induction hardening） |
Precision Guide pins
| Product name | M-GPSFS |
| Type | Straight, Press-fit length designation type (With spiral oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 60～64HRC （Induction hardening） |
Guide bushings
Guide bushings
| Product name | m-gba |
| Type | Shoulder type (No oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 58～62HRC |
Guide bushings
| Product name | M-GBB |
| Type | Straight type (No oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 58～62HRC |
Precision guide bushings
| Product name | M-GBHF |
| Type | Shoulder type (With oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 58～62HRC |
Precision guide bushings
| Product name | M-GBSF |
| Type | Straight type (With oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 58～62HRC |
Guide bushings
| Product name | M-GBGF |
| Type | Shoulder type (With oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 58～62HRC |
Guide bushings
| Product name | M-GBRF |
| Type | Straight type (With oil groove) |
| Material | SUJ2 |
| Heat treatment hardness | 58～62HRC |
Guide bushings
| Product name | M-GBGDF |
| Type | Shoulder, Self lubricating copper alloy type |
| Material | Copper alloy (solid lubricant embedded) |
Guide bushings
| Product name | M-GBRDF |
| Type |
Straight, self lubricating, Copper alloy type |
| Material | Copper alloy (solid lubricant embedded) |
Support pins
Support pin
| Product name | M-SPN | ||
| Type | Head type(With oil groove) | ||
| Material | SUJ2 | ||
| Heat treatment hardness | 60～64HRC （Induction hardening） |
||
Support pins
| Product name | M-SPHF | ||
| Type | Head, Press-fit length designation type (No oil groove) |
||
| Material | SUJ2 | ||
| Heat treatment hardness | 60～64HRC （Induction hardening） |
||
Support pins
| Product name | M-SPHFS | ||
| Type | Head, Press-fit length designation type (With spiral oil groove) |
||
| Material | SUJ2 | ||
| Heat treatment hardness | 60～64HRC （Induction hardening） |
||
Support pin collars
| Product name | M-SPC | ||
| Material | S45C | ||
Support pin collars
| Product name | M-SPD | ||
| Usage | For setting 5mm | ||
| Material | S45C | ||
Taper guide pin sets
| Product name |
Pair | M-TLCS | M-TLDS |
| Pin | M-TLCP | M-TLDP | |
| Bush | M-TLCB | M-TLDB | |
| Type | Bolt PL Installation type (Precision) |
||
| Material | SKS3 | ||
| Heat treatment hardness |
58～62HRC | ||
| Each coaxiality of taper portion for pin or bush | up to 0.005 | up to 0.003 | |
| Product name |
Pair | M-TLGS | M-TLHS |
| Pin | M-TLGP | M-TLHP | |
| Bush | M-TLGB | M-TLHB | |
| Type | Basic type (Precision) |
||
| Material | SKS3 | ||
| Heat treatment hardness | 58～62HRC | ||
| Each coaxiality of taper portion for pin or bush | up to0.005 | up to 0.003 | |
| Product name | Pair | M-TLBS |
| Pin | M-TLBP | |
| Bush | M-TLBB | |
| Type | JIS type (Precision) |
|
| Material | SKS3 | |
| Heat treatment hardness | 58～62HRC | |
| Each coaxiality of taper portion for pin or bush | up to 0.005 | |
Disc spacers
| Product name |
M-DSA (For M-TLBS) |
M-DSD (For M-TLCS, TLDS, TLGS and TLHS) |
| Material | SK3 | SCM435 |
| Heat treatment hardness | 48～52HRC | 45～51HRC |
| Product name |
M-DSB (For M-TLBS) |
M-DSE (For M-TLCS, TLDS, TLGS and TLHS) |
| Material | SK3 | SCM435 |
| Heat treatment hardness | 48～52HRC | 45～51HRC |
| Product name |
M-DSC (For M-TLBS) |
M-DSF (For M-TLCS, TLDS, TLGS and TLHS) |
| Material | SK3 | SCM435 |
| Heat treatment hardness | 48～52HRC | 45～51HRC |
Angular pins
| Product name |
M-AGA | ||
| Material | SUJ2 | ||
| Heat treatment hardness | 60～64HRC （Induction hardening） |
||