USB-rs485 Converter "RSC-U485"

Feature

"RSC-U485" is a converter for USB and rs485.
By using RSC-U485, you can communicate with rs485-Command-Type Servo from USB Port of a PC.

---

RSC-U485 is a bus-powerd USB device but will not supply electoric power to the servos.
So a Power-Supply for each servos such as a battery or a switching power supply is needed.

RSC-U485

Driver

To use RSC-U485 with Windows8 64bit,
Please perform the following operation before installing a driver.

[attention]
The mentioned operation invalidates a driver signature and installs a driver of RSC-U485.
Please understand that there is not a signature for our RSC-U485 driver.

[procedure]
1. According to the procedure of the following site of Microsoft, display "Windows Startup Settings screen"
 and please choose "Disable driver signature enforcement".

http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
*Click here to jump to the site of Microsoft.

Then the PC restarts.

2. Please install a driver of RSC-U485 according to its manual after restarting.

3. Please restart the PC after installing the driver.
The driver signature returns to be enable after restarting.